Last Updated on October 29, 2020 by Admin
Refer to the exhibit. A network administrator is configuring RT1 for inter-VLAN routing. The switch is configured correctly and is functional. Host1, Host2, and Host3 cannot communicate with each other. Based on the router configuration, what is causing the problem?
- Interface Fa0/0 is missing IP address configuration information.
- IP addresses on the subinterfaces are incorrectly matched to the VLANs.
- Each subinterface of Fa0/0 needs separate no shutdown commands.
- Routers do not support 802.1Q encapsulation on subinterfaces.
Answers Explanation & Hints:
Since Host 1 (in VLAN 20) has the IP 172.18.1.10/27, the subinterface Fa0/0.1 should be configured with an IP address in the network 22.214.171.124/27. Similarly, Fa0/0.2 should be with an IP address in the network 126.96.36.199/27 and Fa0/0.3 should be with an IP address in the network 188.8.131.52/27.