MF Wireless LAN Networks Quiz Online - CCNA 7 Exam Answers 2023

Last Updated on May 20, 2021 by Admin

MF -- Wireless LAN Networks Quiz

Time limit: 0

Quiz-summary

0 of 9 questions completed

Questions:

Information

MF — Wireless LAN Networks Quiz

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading...

You must sign in or sign up to start the quiz.

You have to finish following quiz, to start this quiz:

Results

0 of 9 questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 points, (0)

Average score
Your score

Categories

Not categorized 0%

Answered
Review

Question 1 of 9

1. Question
3 points
Where would Wireless Access Points likely be found?
- Cafes
- Airport
- Hotels
- Secure facilities
Correct

Incorrect
Question 2 of 9

2. Question
3 points
What statements correctly describe the frame subtypes in management frame? (Choose 3)
- Association request: Carries information about the connection including SSID.
- Beacon frame: Sends periodically from an Access Point to announce its presence and provide the SSID and other preconfigured parameters.
- Probe request frame: Sends from a wireless client when it requires information from the wireless network.
- Reassociation request: Sends by a wireless client when it’s Association request is rejected by a Access Point.
- Authentication frame: The Access Point sends an authentication frame to the wireless client requesting its identity.
Correct

Incorrect

Question 3 of 9

3. Question

3 points

Match the frequency channel saturation avoidance technique used.

Sort elements

Direct-sequence spread spectrum (DSSS)
Orthogonal frequency-division multiplexing (OFDM)
Frequency-hopping spread spectrum (FHSS)
Frequency Modulation
Pulse Modulation

The technique creates redundancy in the transmitted signal in an effort to counter quality loss in the wireless medium.

This technique is able to maximize spectral efficiency without causing adjacent channel interference.

This technique requires the sender and receiver to be synchronized to “know” which channel to jump.

Correct

Incorrect

Question 4 of 9

4. Question
1 points
What are the three-stage process use by wireless client to associate with a Wireless Access Point? (One Answer per line)
Correct

Incorrect
Question 5 of 9

5. Question
1 points
What are reasons for clustering Access Points ?
- Deployment of Access Points viewed as a single wireless network.
- All of the above.
- Single point of administration for Access Points.
- Ease in setting up, configuration and management.
- Avoid channel interference.
Correct

Incorrect
Question 6 of 9

6. Question
4 points
What are the differences between Autonomous Access Point and Controller-based Access Point. (Choose 4)
- Autonomous Access Point is standalone.
- Controller-based Access Point is server dependent.
- Controller-based Access Point is managed by a WLAN Controller.
- Controller-based Access Point is manually configured using GUI or CLI.
- Autonomous Access Point is use for a network that requires only a couple of access points.
Correct

Incorrect
Question 7 of 9

7. Question
3 points
Which of the following statements about SSIDs are true? (Choose 3)
- They should be unique to your wireless LAN.
- They are broadcast, by default, by most wireless network devices.
- Only one wireless device uses them.
- All wireless networks use them.
Correct

Incorrect
Question 8 of 9

8. Question
1 points
In an attempt to maximize your wireless throughput while minimizing interference on your brand new 802.11b/g wireless Access Point, which setting should you change?
- Change the default channel as appropriate.
- Change the frequency to 5.0 GHz.
- Change the channel to 6.
- Change the WAP setting not to broadcast the SSID.
Correct

Incorrect

Most Access Points come with default channel setting. To avoid interference with neighboring networks, it is advisable to use a wireless channel scanner to check for the less congested channel. Set your access point accordingly. Try to avoid placing access points near walls of the facility to minimize interference with neighboring networks. In addition to changing the channel, other settings you may wish to change include the name of your network and your router’s security options.
Question 9 of 9

9. Question
1 points
Bob has set up a Wi-Fi network for his café that works well within the indoor area, but works poorly on the patio. What’s the least expensive option for making Wi-Fi work for the patio customers?
- Exchange his 802.11g wireless Access Point for an 802.11n Access Point.
- Run another network point to the patio and add a second Access Point.
- Replace the factory antennas on the wireless Access Point.
- Reverse the polarity on the Access Point’s antennas.
Correct

Incorrect