An OSPF router has three directly connected networks; 172.16.0.0/16, 172.16.1.0/16, and 172.16.2.0/16. Which OSPF network command would advertise only the 172.16.1.0 network to neighbors?

Posted on By Admin

Last Updated on November 7, 2020 by Admin

An OSPF router has three directly connected networks; 172.16.0.0/16, 172.16.1.0/16, and 172.16.2.0/16. Which OSPF network command would advertise only the 172.16.1.0 network to neighbors?

  • router(config-router)# network 172.16.1.0 0.0.255.255 area 0
  • router(config-router)# network 172.16.0.0 0.0.15.255 area 0
  • router(config-router)# network 172.16.1.0 255.255.255.0 area 0
  • router(config-router)# network 172.16.1.0 0.0.0.0 area 0
    Answers Explanation & Hints:

    To advertise only the 172.16.1.0/24 network the wildcard mask used in the network command must match the first 24-bits exactly. To match bits exactly, a wildcard mask uses a binary zero. This means that the first 24-bits of the wildcard mask must be zero. The low order 8-bits can all be set to 1.

For more question and answers:

Click Here CCNA3 v7 – ENSA – Modules 1 – 2: OSPF Concepts and Configuration Exam Answers Full 100%

Uncategorized