Last Updated on August 2, 2020 by Admin
10.4.3 Packet Tracer – Basic Device Configuration Answers
Packet Tracer – Basic Device Configuration (Answers Version)
Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.
Topology
You will receive one of three possible topologies.
Addressing Table
|
Device |
Interface |
IP Address |
Default Gateway |
|
[[R1Name]] |
G0/0 |
[[R1G0Add]]/24 |
N/A |
|
[[R1Name]] |
G0/0 |
[[R1G0Addv6]]/64 |
N/A |
|
[[R1Name]] |
G0/0 |
[[R1G0Addv6LL]] |
N/A |
|
[[R1Name]] |
G0/1 |
[[R1G1Add]]/24 |
N/A |
|
[[R1Name]] |
G0/1 |
[[R1G1Addv6]]/64 |
N/A |
|
[[R1Name]] |
G0/1 |
[[R1G1Addv6LL]] |
N/A |
|
[[S1Name]] |
VLAN 1 |
[[S1Add]] |
[[R1G0Add]] |
|
[[S2Name]] |
VLAN 1 |
[[S2Add]]/24 |
[[R1G1Add]] |
|
[[PC1Name]] |
NIC |
[[PC1Add]]/24 |
[[R1G0Add]] |
|
[[PC1Name]] |
NIC |
[[PC1Addv6]]/64 |
[[R1G0Addv6LL]] |
|
[[PC2Name]] |
NIC |
[[PC2Add]]/24 |
[[R1G0Add]] |
|
[[PC2Name]] |
NIC |
[[PC2Addv6]]/64 |
[[R1G0Addv6LL]] |
|
[[PC3Name]] |
NIC |
[[PC3Add]]/24 |
[[R1G1Add]] |
|
[[PC3Name]] |
NIC |
[[PC3Addv6]]/64 |
[[R1G1Addv6LL]] |
|
[[PC4Name]] |
NIC |
[[PC4Add]]/24 |
[[R1G1Add]] |
|
[[PC4Name]] |
NIC |
[[PC4Addv6]]/64 |
[[R1G1Addv6LL]] |
Objectives
- Complete the network documentation.
- Perform basic device configurations on a router and a switch.
- Verify connectivity and troubleshoot any issues.
Scenario
Your network manager is impressed with your performance in your job as a LAN technician. She would like you to demonstrate your ability to configure a router that connects two LANs. Your tasks include configuring basic settings on a router and a switch using the Cisco IOS. You will also configure IPv6 addresses on network devices and hosts. You will then verify the configurations by testing end-to-end connectivity. You goal is to establish connectivity between all devices.
Note: The VLAN1 interface on [[S1Name]] will not be reachable over IPv6.
In this activity you will configure the [[R1Name]] router, [[S2Name]] switch, and the PC hosts.
Note: Packet Tracer will not score some configured values, however these values are required to accomplish full connectivity in the network.
Requirements
- Provide the missing information in the Addressing Table.
- Name the router [[R1Name]] and the second switch [[S2Name]]. You will not be able to access the [[S1Name]] switch.
- Use cisco as the user EXEC password for all lines.
- Use class as the encrypted privileged EXEC password.
- Encrypt all plaintext passwords.
- Configure an appropriate banner.
- Configure IPv4 and IPv6 addressing for the [[R1Name]] switch according to the Addressing Table.
- Configure IPv4 and IPv6 addressing for the [[S2Name]] switch according to the Addressing Table.
- The hosts are partially configured. Complete the IPv4 addressing, and fully configure the IPv6 addresses according to the Addressing Table.
- Document interfaces with descriptions, including the [[S2Name]] VLAN 1 interface.
- Save your configurations.
- Verify connectivity between all devices. All devices should be able to ping all other devices with IPv4 and IPv6.
- Troubleshoot and document any issues.
- Implement the solutions necessary to enable and verify full end-to-end connectivity.
Note: Click Check Results button to see your progress. Click the Reset Activity button to generate a new set of requirements.
ID: [[indexNames]][[indexAdds]][[indexTopos]]
End of document
This activity is configured with an error that the student must correct before receiving full credit. The IP address on [[PC4Name]] is in the wrong subnet and does not match the IP address in the Addressing Table. The correct answers depend on the scenario the student received.